Power Supply
Changing the Battery
The battery compartment is at the back of the analyzer. To re-
move the lid, press on the grooved arrow and pull the cap off. The
foam pad inserted pushes the battery against the lid preventing
the heavy battery from rattling. This is the reason for the lid's re-
sistance during opening.
Auto-Power-Off:
This feature conserves energy and extends the total operating
time.
1. In case you have forgotten to turn OFF the HF analyzer or
it has been turned ON accidentally during transport, it will
shut off automatically after 40 minutes of continuous use.
2. If "LOW BATT" appears vertically between the digits in the
centre of the display, the HF analyzer will turn OFF after 2
to 3 min in order to avoid unreliable measurements. It re-
minds you to change the battery as soon as possible.
© Gigahertz Solutions GmbH
Made in Germany
17