JUMO Logoscreen Operating Instructions Manual page 49

Standard texts
Freely definable
texts
Supplementary
text
Interface text
The recorder offers standard texts as listed in the following table:
Standard text
Grx Chany low alarm ON
Grx Chany low alarm OFF
Grx Chany high alarm ON
Grx Chany high alarm OFF
Logic input x ON
Logic input x OFF
Ext. input x ON
Ext. input x OFF
Power ON
Power OFF
Data lost
Summer time start
Summer time end
New configuration
Counter 1: +xxxxx
Counter 2: +xxxxx
146 texts belonging to the group of standard texts can be freely defined, up to
a length of 20 characters.
Standard text
"Text 1 — 146"
In the case of logic signals and alarms,
the supplementary text "ON" or "OFF" is
added automatically, on counters the
current count is added.
The recorder automatically supplements the texts by "ON" or "OFF" in order to
distinguish between the appearance and disappearance of the signal.
Example:
Standard text
Logic input 2
Logic input 2
A text of up to 20 characters length can be entered in the event list via the
serial interface. For further information, please refer to the Interface
Description B 95.5011.2.0
3 Operation and visualization
Comment
x = group number
y = channel number
5 digits plus sign,
no decimal point
Comment
146 freely definable texts
with 20 characters each
Supplementary text
ON
OFF
Entry in event list
Logic input 2 ON
Logic input 2 OFF
49