JUMO Logoscreen Operating Instructions Manual page 41

Completed
batch report
The screenshot shows a completed batch report that does not include the
possibility of executing an electronic signature.
Switch the four right-hand softkeys to additional functions
Switch the four right-hand softkeys to original functions
How to operate the "vertical" and "horizontal diagrams" is described in
Chapter 3.2.3 "Evaluation of the stored measurement data".
D
Pressing the key will call up the batch report again.
3 Operation and visualization
Change between "completed" and "current"
batch report
Show data of batch report as history in
"horizontal diagram"
Show data of batch report as history in "vertical diagram"
Change to the previous/
next visualization
Show report data of batch
report
.
.
41