JUMO Logoscreen Operating Instructions Manual page 38

3 Operation and visualization
Batch texts
Texts can be edited on
the instrument and through
the setup software.
Instrument:
- configuration
- report/batches
- ext. report/batches
- batches
- line 1—10
- text in left column
Setup software:
- report / batches
- ext. report / batches
- edit
- batch report
1. Only available, if the batch parameter "Text editable?" is set to "Yes".
2. According to option, also
3. Each line has to be activated
38
How can something be edited? Here is the summary again:
The batch number can only
be edited on the instrument.
in the configuration
If batch start/end/
duration are used,
the lines cannot be
edited.
or
for writing via interface.
Texts can be edited on
the instrument and by
using the setup software.
They can also be
transferred online to an
instrument, through the
setup software.
Instrument:
- configuration
- report/batches
- ext. report/batches
- batches
- line 1—10
- default text
1
Instrument:
- visualization
- group 1—6
- current batch
report
press
-
- place red bar
- press
2
again
- edit
Setup software:
- report / batches
- ext. report / batches
- edit
- batch report
Setup software
(online):
- make connection
- extras
- write interface
3
texts
.