JUMO Logoscreen Operating Instructions Manual page 35

Text field (1)
Text field (2)
Text field (1) has to be set up before commissioning the system. Each line
consists of a maximum of 15 characters.
Example: Parameter setting for line 1
Parameter for line 1
Configuration Report/Batches
Ext.Report/Batches
Line 1 Text left column
Text field (2) "Lines 1 — 6" was pre-assigned during recorder configuration,
but can be overwritten as long as the batch is not completed. Each line can
hold text with a maximum of 20 characters.
Example: Parameter setting for line 1
Parameter for line 1
Configuration Report/Batches
Ext.Report/Batches
Line 1 Contents right column
Configuration Report/Batches
Ext.Report/Batches
Line 1 Default text
Configuration Report/Batches
Ext.Report/Batches
Line 1 Text editable?
Using the text editor (button
the texts can be altered at a later stage, through the setting
"Text editable = Yes".
Example: Parameter setting for line 5
Parameter for line 5
Configuration Report/Batches
Ext.Report/Batches
Line 5 Contents right column
Configuration Report/Batches
Ext.Report/Batches
Line 5 from text No.
Configuration Report/Batches
Ext.Report/Batches
Line 5 to text No.
Configuration Report/Batches
Ext.Report/Batches
Line 5 Text editable?
Configuration Texts
Configuration Texts
The text in line 5 is selected from the internal text list of the recorder by calling
up the button
3 Operation and visualization
Parameter setting
Program name
Batches
Parameter setting
Fixed text
Batches
C/65
Batches
Yes
Batches
), which is integrated in the recorder,
Parameter setting
Text list
Batches
90
Batches
91
Batches
Yes
Batches
Text 90 Tablets XYZ
Text 91 Tablets 123
followed by .
35