Table of Contents
Advertisement
Z-Wave Home Automation Control Gateway
HAC-1000
B. Magnet Installation
To install the HAC-1000 on a magnetic surface, simply follow the following picture:
C. Ethernet Connection
There is a LAN port on the HAC-1000. Please connect to your router/switch.
2.3 Initial Utility Installation
This chapter shows how to use utility to find the IP of your
control
gateway. The gateway is
with the default settings. However, to help you find the network gateway quickly, the windows
utility PLANET Smart Discovery can search
control gateway
in the network that can help you
to configure some basic settings before you start advanced management.
Please download the search tool from
PLANET Download
Center:
Step 1:
Unzip the file and run the program "SmartDiscoveryLite".
Step 2:
11
-
-
Advertisement
Table of Contents
