Planet Networking & Communication HAC-1000 User Manual page 35

Create Trigger via smart phone.
Step 4.
a. Click "Add".
c. Select the Z-Wave device and click
next.
g. Done successfully.
Z-Wave Home Automation Control Gateway
b. Name this new Trigger.
d. Select a mode for a Z-Wave device.
e. Select a scene.
f. Select the time for the trigger and
which scene to run.
h. If you enable Save and send alarm
notification, when it triggers, it will
have a log. You can check this in
Notification History.
35
- -
HAC-1000