Appendix A: Configuring Z-Wave Device Via Web - Planet Networking & Communication HAC-1000 User Manual

Appendix A: Configuring Z-Wave Device
Please refer to the following steps to add Z-Wave device via web.
Step 1. Include a Z-Wave device via web.
a) Go to "Z-Wave" and click "Device
Configuration".
b) Click" Include New Device" and the
screen will appear with "Add Device:
Waiting for a user action."
c) Press the program switch button on
the Z-Wave device to connect.
d) If your device has successfully been added, it will show "Add Device: Command has
been completed successfully".
If the device didn't add successfully, please place the device next to the
gateway and try again.
via Web
27
- -
Z-Wave Home Automation Control Gateway
HAC-1000