Planet Networking & Communication HAC-1000 User Manual page 26

Removing a Device Already Connected
Your Hub will enter exclude mode automatically when you remove a Z-Wave device from the
Things page. This means you can delete the device from there as you normally would, just be
sure to execute the required button press or exclusion process as outlined by the device's user
guide.
In order to exclude a Z-Wave device, you must have the physical device with you
and be within range of the SmartThings Hub.
Door Lock Setting
This section allows operating door locks.
Z-Wave locks give homeowners the ability to remotely manage access to their
homes via most web-enabled computers or cell phones. With these locks
homeowners can also receive text or email alerts when someone enters their
home. Z-Wave locks can send emails and text messages so you know who is
home, and it allows you to confirm the status of your system from anywhere. As
long as you have a web-enabled cell phone or computer, Z-Wave locks let you stay
in touch and in control.
Z-Wave locks allows you to grant entry to your door remotely from your cell phone
or computer, assign and manage a personal code for each user, and give every
family member a code they can remember.
Version Information
This information shows the software version in the device.
Z-Wave Home Automation Control Gateway
26
- -
HAC-1000