Trigger; Schedule - Planet Networking & Communication HAC-1000 User Manual

Z-Wave Home Automation Control Gateway
HAC-1000

4.5 Trigger

The Trigger tab lets the user create a trigger by entering its name, and then select a device, a
mode and a scene.
You can create a trigger when your device is selected, and set the mode and scene to "alarm"
and "heater on". Please refer to Appendix A or B to set the Trigger.

4.6 Schedule

Using Schedule programs, you can easily program the devices' schedule for the entire week.
You can control your devices according to schedule. Please refer to Appendix C to set the
schedule.
24
- -