Touchscreen Display; Log User In Or Out; Viewing And Acknowledging Events - Dräger VVP 1000 Instructions For Use Manual

5.2

Touchscreen display

The buttons on the touchscreen display change dynamically
depending on the task being executed. To execute an action,
select the corresponding icon on the display.
5.3

Log user in or out

The following user levels are set up by default:
User
Configurator
Administrator
Service
To log in a user:
1. Select .
a. Select .
b. Select the desired user level from the list.
2. Select the password input field.
3. Enter the password and confirm with
To log out the current user:
1. Select .
Information about the current user will be displayed.
2. Select .
The current user will be logged out.
NOTICE
i i
If the touchscreen is not operated for 10 minutes, the
current user will be logged out automatically.
5.4

Viewing and acknowledging events

5.4.1 Viewing events
When an event occurs, this is indicated by the event symbol in
the header.
Dräger VVP 1000
Password
0001
0002
XXXX
.
1
00233547.eps
The following events are displayed and saved:
Maintenance urgently needed CHxxx

Maintenance necessary CHxxx

Exposure alarm CHxxx

Alarm 1 CHxxx

Alarm 2 CHxxx

Alarm 3 CHxxx

Alarm 4 CHxxx

Average alarm 1 CHxxx

Average alarm 2 CHxxx

Average alarm 3 CHxxx

Average alarm 4 CHxxx

Interruption due to PC CHxxx

Sensor warming up CHxxx

Over range CHxxx

Under range CHxxx

To display events:
Select in the header or select

The Events screen shows the events in different colours:
Colour
Red
Yellow
Black
Blue
5.4.2 Acknowledging events
To acknowledge an event:
Select the desired event from the Events list.

The acknowledged message turns blue.
To acknowledge all events of the Events list and the control unit:
Select .

Operational characteristics
> Events
00333547_en.eps
Meaning
Gas alarm
Fault or warning
Status information
Acknowledged message
25