Operational Characteristics; Basics - Dräger VVP 1000 Instructions For Use Manual

Operational characteristics

5 Operational characteristics
5.1

Basics

5.1.1 Operating and display elements
3
2
1
1 List of channels
2 Channel header bar:
No.
TAG
PV
Status
3 Channel range register
4 Event symbol
5 Menu
6
Log user in or out
User level display
24
List of the 10 channels from the active channel range register.
Display of the bus device and bus address (transmitter/ relay module, etc.)
Bus device designation
Display of measured values (measured gas/measured value/measuring range, etc.)
Status display
Fault
Maintenance/urgent maintenance
Deactivated bus device
Actual alarm A1 to A4
Average alarms MA1 to MA4
Transmitter warm-up phase
Each of the 10 channel range registers shows 10 channels.
The event symbol appears when an event is pending (see Section 6.1 on page 26).
Select this button to access the menu.
Select this button to log users in or out.
When a user is logged in, the current user level is displayed in the icon.
Three user levels are available: Configurator, Administrator and Service.
4 5
6
03133026_de.eps
00133547.eps
Dräger VVP 1000