Table of Contents
Advertisement
Installation Overview
To install the switch, you will need to do the following:
1. Mount the switch
2. Connect AC Power
3. Install SFP+ Modules
Installation Steps
To install the SDX 8110-24-740W switch, complete the following steps:
Mount The Switch
The switch can be mounted in a 19-inch rack, on a desk or shelf, or on a wall.
Mounting in a 19-inch Rack
To mount the switch into a 19-inch rack, complete the following steps.
1. Attach the brackets provided in the mounting kit to both sides of the chassis. Insert the provided screws and tighten them with a
screwdriver to secure the brackets.
2. Place the switch on a rack shelf in the rack. Push it in until the oval holes in the brackets align with the mounting holes in the rack
posts.
3. Secure the brackets to the posts by inserting rack screws and tightening them with an appropriate screwdriver.
g
NOTE
Rack mount brackets are a default accessory with the unit; spare brackets can be ordered through ADTRAN, part number: 1700519F1.
2
Figure 3. Attaching Brackets to the Switch
Figure 4. Attaching Brackets to the Rack Post
617108124PF2-13C
Advertisement
Table of Contents
