Assembly; Attaching The Lower Handles - ALDI FERREX 161CC User Manual

Assembly

Assembly
A.
2 X SETS OF UPPER
HANDLE LOCKING LEVERS
WARNING: Stop the engine and unplug the spark plug before any
repairs or maintenance operations.
WARNING: DO NOT attempt to start this mower without first adding
0.35L of SAE 10W/30 engine oil to the Engine.
WARNING: Do Not attempt to start this mower without the mower
first being FULLY assembled.
It is necessary to fit the 2 x lower handles (6), upper handle bar (1), and hard
catcher (7) to the mower. (Fig A)

Attaching the Lower Handles

NOTE: The variable speed switch cable (3) is connected to the upper handle
bar (1). Be careful not to tangle the cable when removing the lawn mower
from the box, and during the upper and lower handle assembly.
1. To attach the 2 x lower handles (6), first remove the 2 x lower handle
locking knobs (+ bolt/s & curved washer/s) (8) from your accessory bag.
Place the lower handle/s in position by first aligning one of the lower
handle ends on the inner side of the lower handle mounting plate (9).
2. Once in position, insert the bolt on each side through the lower handle
mounting plate (Fig B) and then through the lower handle (6). (Fig C)
Repeat with the opposite side handle.
3. Once the bolts are loose in position, fit the plastic curved washer, then
20
info.aldi@positecgroup.com
e-mail: help@powertoolsupport.com
MODEL: №. DM46P-DO160 • 09/2018 • 60751
2 X SETS OF LOWER
HANDLE LOCKING KNOBS
10/2019 10852
4 Stroke Petrol Lawn Mower
AFTER SALES SUPPORT
1300 889 028
1800 909 909
(toll free)