Operation
5.6 Shutting down the engine
Caution
!
Do not shut the engine down all of the sudden
from full speed, but let it idle for a while for
temperature equalization.
Fig. 25
Move the throttle lever (Fig. 25) back to idle
l
speed position.
Run the engine for a short while in idle speed.
l
Fig. 26
Press the engine shut-down button (Fig. 26).
l
Danger
!
Danger of burning!
Immediately after shutting down the engine is
still hot, do not touch the exhaust.
Park the machine so that it cannot turn over.
30
Fig. 27
Set the fuel valve (Fig. 27) to "STOP" position
l
(closed).
Fig. 28
Pull the rope by the starter handle (Fig. 28) un-
l
til resistance can be felt.
Let the starter handle run back to initial posi-
l
tion.
i
Note
This procedure protects against moisture deposits
inside the engine.
BOMAG
BT 60/4, BT 65/4