As Required; Check, Clean The Air Filter, Replace If Necessary - Bomag BT 60/4 Operating Instructions, Maintenance Instructions

Table of Contents

Advertisement

As r equired
6.18 Check, clean the air filter,
replace if necessary
Caution
!
Do not run the engine without air filter.
Do not continue to use a damaged air filter. If
in doubt use a new air filter.
Contamination of the air filter depends mainly
on the proportion of dust in the intake air, if
necessary clean several times a day.
In case of wet or sticky contamination replace
the air filter.
The air filter must be changed after several
times cleaning, but at the latest after one year.
Fig. 71
Remove cover (1) (Fig. 71), carefully take out
l
filter (2).
Caution
!
Make sure that no dirt falls into the air intake
channel.
Danger
!
Danger of injury!
Always wear protective clothes (goggles,
gloves) when working with compressed air.
BT 60/4, BT 65/4
Fig. 72
In case of dry fine dust blow out the filter care-
l
fully from inside to outside with dry, clean com-
pressed air (Fig. 72) (max. 6 bar (87 psi)).
Caution
!
Before installation check seals and air filter for
damage, replace if necessary.
Insert the air filter (2) (Fig. 71) and close the air
l
filter cover.
Fig. 73
Remove the protection grid on the left hand
l
side of the engine (Fig. 73).
BOMAG

As required

55

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Bt 65/4

Table of Contents