Inserting credit cards
Fig . 8
NOTE
►
Always insert the credit card into the middle of the CD/credit card cutter
opening
►
If you want to ensure that the information on the magnetic strip is irrevocably
destroyed, insert the credit card into the middle of the cutter opening for
paper
position .
Note that the residue will then fall into the large waste collector
If necessary, empty this beforehand in order to keep paper and plastic
waste separate .
Inserting a CD
WARNING! RISK OF INJURY!
►
Never insert your finger into the central hole of a CD when you are feeding
it into the appliance .
Fig . 9
UAVS 300 A1
Insert the credit card from above into the middle of the
CD/credit card cutter opening
the REV/OFF/AUTO/FWD switch
("forward") position .
You can only shred one credit card at a time . Always insert
the card into the CD/credit card cutter opening
the wide side first . Otherwise, the magnetic strip will not be
destroyed .
2
. Otherwise, the shredding process will not start .
9
and move the REV/OFF/AUTO/FWD switch
Insert the CD from above into the middle of the CD/credit
card cutter opening
one CD at a time .
2
(see fig . 8) and move
8
to the FWD
8
to the FWD
2
(see fig . 9) . You can only shred
GB │ IE │ NI
2
with
e
.
│
■
9