Quectel EC25-V User Manual page 67

V max
OH
V min
OH
V max
OL
V min
OL
VSWR
Directives and Standards
The EC25-V module is designed to comply with the FCC statements. FCC ID: XMR201607EC25V,
The Host system using EC25-V, should have label indicated FCC ID: XMR201607EC25V.
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment .This equipment should be installed and operated with minimum distance 20 cm between
the radiator & your body.
If using a permanently affixed label, the modular transmitter must be labeled with its own FCC
identification number, and, if the FCC identification number is not visible when the module is
installed inside another device, then the outside of the device into which the module is installed must
also display a label referring to the enclosed module. This exterior label can use wording such as
the following:
"Contains Transmitter Module FCC ID: XMR201607EC25V" or "Contains FCC ID:
XMR201607EC25V". Any similar wording that expresses the same meaning may be used. The
Grantee may either provide such a label, an example of which must be included in the application
for equipment authorization, or, must provide adequate instructions along with the module which
explain this requirement. In the latter case, a copy of these instructions must be included in the
application for equipment authorization.
This device is to be used in mobile or fixed applications only. Antenna gain including cable loss must
not exceed 10.71 dBi of frequency band 777-787 MHz, 6.5 dBi of frequency band 1710-1755 MHz,
for the purpose of satisfying the requirements of 2.1043 and 2.1091.
The antenna(s) used for this transmitter must be installed to provide a separation distance of at
least 20 cm from all persons and must not be co-located or operated in conjunction with any antenna or
transmitter not described under this FCC ID. The final product operating with this transmitter must
include operating instructions and antenna installation instructions, for end-users and installers to satisfy
RF exposure compliance requirements.
EC25-V_User_Manual
69
Maximum Output High Level Voltage Value
Minimum Output High Level Voltage Value
Maximum Output Low Level Voltage Value
Minimum Output Low Level Voltage Value
Voltage Standing Wave Ratio
Confidential / Released
LTE Module Series
EC25-V User Manual
66 /