Stm32 (Steval-Pcc012V1) And Evalst7570-1; Figure 1. Evalst7570 - Microcontroller Extension Connection; Figure 2. Steval-Pcc012V1 - Plm Connector Cn7 - ST STM32 User Manual

UM1038
2

STM32 (STEVAL-PCC012V1) and EVALST7570-1

The demonstration boards necessary to connect the STM32 and ST7590 boards and their
configuration:
1. STEVAL-PCC012V1
●
●
2. EVALST7590-1
●
●
Figure 1.
Figure 2.
Flash the correct firmware into STM32.
Configure the board according to
Put the jumper into position JP12 - USB_RES (see paragraph
in Appendix C).
Interconnect EVALST7570-1 according to
EVALST7570 - microcontroller extension connection
STEVAL-PCC012V1 - PLM connector CN7
Doc ID 18303 Rev 1
STM32 (STEVAL-PCC012V1) and EVALST7570-1
Figure 3.
Table 1,
1
Figure 4 and Figure 5.
5/24