Appendix C Endnotes; Revision History; Document Revision History - ST STM32 User Manual

UM1038
Appendix C
1. The tri-states output pins of the FTDI chip FT232 are used on EVALST7590-1 in order
to make it possible to use an external microcontroller to control the EVALST7590-1
board. (The FTDI chip should be also in reset when not connected to USB).
2. This interconnection does not implement signals for asynchronous communication from
ST7590 to STM32.

Revision history

Table 7.
Date
18-Apr-2011
Endnotes

Document revision history

Revision
1 Initial release.
Doc ID 18303 Rev 1
Changes
Endnotes
23/24