Mounting The Device; Dimensions - NI cRIO-9066 User Manual

dynamic libraries are deployed on other LabVIEW Real-Time targets, to
where they are stored on the cRIO-9066, if the application requires this.
For more information, visit

Mounting the Device

To obtain the maximum allowable ambient temperature of 55 °C, you must mount the
cRIO-9066 horizontally on a flat, metallic, vertical surface such as a panel or wall. You can
mount the cRIO-9066 directly to the surface or use the NI Panel Mounting Kit. The following
figure shows the cRIO-9066 mounted horizontally.
1. Up
You can also mount the cRIO-9066 in other orientations, on a nonmetallic surface, on a
35-mm DIN rail, on a desktop, or in a rack. Mounting the cRIO-9066 in these or other
configurations can reduce the maximum allowable ambient temperature and can affect the
typical accuracy of modules in the cRIO-9066. For more information about typical accuracy
specifications for C Series modules and temperature deratings caused by different mounting
configurations, visit
Caution
mounting it.
Tip Before using any of these mounting methods, record the serial number from
the back of the cRIO-9066 so that you can identify the cRIO-9066 in MAX. You
will be unable to read the serial number after you mount the cRIO-9066.

Dimensions

The following figures show the front and side dimensions of the cRIO-9066. For detailed
dimensional drawings and 3D models, visit
number.
ni.com/info and enter the Info Code
Figure 6. cRIO-9066 Horizontal Mounting
ni.com/info and enter the Info Code
Make sure that no C Series modules are in the cRIO-9066 before
criotypical
ni.com/dimensions and search for the module
NI cRIO-9066 User Manual | © National Instruments | 15
/usr/local/lib
.
RT_Paths
1
.
,