Connecting Safety Ground; Connecting To Power Source; Rack Mounting - NI 8352 Installation Manuallines And Operating Instructions

Connecting Safety Ground

Connecting to Power Source

Caution To completely remove power, you must disconnect the AC power cable.

Rack Mounting

Note To rack mount the NI 8352/8353, the chassis must be at least 26 in. deep.
Note One pair of short brackets includes screw threads, and the other pair does not.
Use the pair that fits into your rack.
NI 8352/8353 Installation Guide
The NI 8352/8353 is designed with a three-position NEMA 5-15 style plug
for the U.S. that connects the ground line to the chassis ground. To
minimize shock hazard, make sure the electrical power outlet you use to
power the chassis has an appropriate earth safety ground.
Attach input power through the rear AC inlet using the appropriate
AC power cable supplied.
The power switch allows you to power on the chassis or place it in standby
mode. Push the power switch to the On position (if not already on). Observe
that all fans become operational and the power indicator is lit.
The rack mounting hardware includes:
• One pair of inner slides to be installed on the chassis.
• One pair of outer slides to be installed in the rack.
• Two pairs of short brackets for the front of the outer slides.
• One pair of long brackets for the rear of the outer slides.
10 ni.com