Parameters - Siemens ET 200M Manual

12/24-Channel, 24 VDC F Discrete Input MTA
13.12.2

Parameters

The Parameters tab of the FDI Hardware Configuration has many options that can
be set by the user.
The Operating mode should be set to the user preference: Standard operation or
Safety mode.
The F parameters are viewable but not alterable.
Module parameters and Time-of-day stamp are described later.
Figure 13– the tree structure of the Parameters:
Figure 13–5 12/24-Channel Fail-Safe Discrete Input Hardware Configuration: Parameter Tree Structure
178
Marshalled Termination Assemblies for ET200M Remote I/O Modules
A5E00482820-12