Outputs - Siemens ET 200M Manual

18.11.2

Outputs

The Relay Output MTA uses the series diode outputs from the DO16 module for
both redundant and non-redundant operation.
All options should be set to user preferences.
Figure 18–4 shows the DO16 configured with all the diagnostics enabled.
Figure 18–4 16-Channel Discrete Output Hardware Configuration: Outputs Configured for Standard Mode
Marshalled Termination Assemblies for ET200M Remote I/O Modules
A5E00482820-12
16-Channel, 24-150 VDC/120-230 VAC Relay Output MTA
247