Hardware Configuration; Addresses - Siemens ET 200M Manual

17.11

Hardware Configuration

The 10 channel Fail-Safe Discrete Output Module and its Relay Output MTA
support Redundant and Non-redundant operation.
17.11.1

Addresses

Non-redundant Operation
The choice of the Input Address and Process Image are left to the user.
Redundant Operation
Process Image should be set to something other than the default. The choice of
the Input Address is left to the user.
Figure 17– shows a redundant configuration.
Figure 17–4 10-Channel Fail-Safe Discrete Output Hardware Configuration: Addresses set for Redundant
Operation
Marshalled Termination Assemblies for ET200M Remote I/O Modules
A5E00482820-12
Failsafe 10-Channel, 24-150 VDC/120-230 VAC Relay Output MTA
233