Glass Frame Assembly; Glass Frame Assembly Identification - Heat&Glo FOUNDATION Series Installation And Operating Manual

A. GLASS FRAME ASSEMBLY IDENTIFICATION
Figure 6A
CAUTION: To prevent glass frame assembly from falling from fireplace and becoming damaged, follow the instructions
exactly when removing and installing glass frame assembly.
STOP: DO NOT operate this fireplace with the glass removed, cracked or broken. Replacement of glass assembly should be
done by a licensed or qualified service person.

WARNING! RISK OF INJURY! DO NOT remove glass until it is cooled to room temperature. Glass breakage could occur.
NOTE: Glass removal and installation must be performed with two people.
NOTE: GLASS MUST BE REMOVED USING QUALITY SUCTION CUPS.
DO NOT attempt to remove the glass without using proper suction cups.
NOTE: IN CASE OF CHIPPED OR BROKEN GLASS
Have your dealer assist you with contacting Hearth & Home Technologies to get the proper glass replacement.
14
Heat & Glo • FDN-4-SS, FDN-5-SS, FDN-6-SS, FDN-7-SS Installation Manual • 16400-9800 Rev. H • 11/19

6 - GLASS FRAME ASSEMBLY

UPPER GROOVE
QUALITY
SUCTION CUP
LOWER FILLER STRIP
SITS OVER GLASS CLIPS
LOWER GROOVE
GLASS
GLASS CLIP
Figure 6B.1