In The Event Of Problems - EdilKamin WINDO2 75 Installation, Use And Maintenance Manual

Table of Contents

Advertisement

IN THE EVENT OF PROBLEMS

1) In case of smoke leaking from the
fi replace hearth, check if:
Installation is correct (smoke channel, chimney fl ue,
stack, air intake). The wood used is dry.the door was
opened too quickly
2) In the event of uncontrolled combustion,
check if:
The seals of the fi replace are intact:
The door of the fi replace is closed properly.
3) If the glass gets dirty quickly, check if:
The wood used is dry.
However, consider that after a few hours of work, it is
normal for a light layer of soot to form on the glass.
4) If the chimney fl ue catches fi re or you need
to suddenly extinguish the fi re lighting in the fi replace:
if possible, in safe conditions, remove the ash and
brazier using tools and only touch metal containers
with fi reproof gloves.
in the event of a fi re, ask the authorities for help
5) In case of odours, check if:
If fi rst switch on: in this case a paint smell is normal.
If the product is dirty or dusty
If you cannot solve the problem, contact
the retailer or, in countries where present,
the authorised Technical Support Centre.
The guarantee is only valid if the product
defect is proven.
IN THE EVENT OF PROBLEMS
NOTES ON REFRACTORY MATERIAL
The inner refractory material was designed to resist
normal use.
Its cleaning is ensured by good combustion.The main
damage to refractory material comes from:
Edilkamin or the retailer cannot be held liable for
damage caused as described above
DISPOSAL
At the end of its service life, dispose of the product as
required by regulations.
accidental knocks
use of fi relighters which are not ecologicalloading
wood beyond the recommended amount
use of fuel other than that recommended
19

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents