Table of Contents
Advertisement
Natural convection circulation
Natural convection circulation
The hot air produced by the fi replace is released into
The hot air produced by the fi replace is released into
the rooms to be heated by the nozzles connected to
the rooms to be heated by the nozzles connected to
the holes on the cover of the hood with aluminium
the holes on the cover of the hood with aluminium
pipes Ø 14 cm.It is essential to guarantee the return of
pipes Ø 14 cm.It is essential to guarantee the return of
the air into the room where the fi replace is installed by
the air into the room where the fi replace is installed by
means of grills at the base of the walls or gaps under
means of grills at the base of the walls or gaps under
the doors.The diameter of the pipes must not be less
the doors.The diameter of the pipes must not be less
than Ø 14 cm.
than Ø 14 cm.
The line of the pipes must be as straight as possible.
The line of the pipes must be as straight as possible.
The aluminium pipes can be hidden with coffer work or
The aluminium pipes can be hidden with coffer work or
false beams or they can be built into the walls; in any
false beams or they can be built into the walls; in any
case, they must be well insulated.
case, they must be well insulated.
The channels must have a maximum length of 4÷5 m
The channels must have a maximum length of 4÷5 m
each.
each.
The said length must be decreased by 1.2 m for
The said length must be decreased by 1.2 m for
every curve and for every nozzle consequent to the
consequent load loss.
The following kits are available to channel hot air.
Kit one/bis solo locale caminetto
Kit four/bis
Kit fi ve/bis
Further details are provided in the assembly instructions
supplied with the kit itself.
Kit 4 bis-ex
Alluminium
pipe
R2 unions
INSTALLATION
Circulation with Kit Air Diffuser
Circulation with Kit Air Diffuser
The Air Diffuser Kit carries hot air into the room where
the product is installed or into other rooms (depending
on the model), assisted by one or more fans.
It is adjusted with a remote control.
Edilkamin proposes two Air Diffuser Kit models:
ADJACENT Air Diffuser Kit
REMOTE Air Diffuser Kit
The difference is in the presence or 1 or 2 fans and the
relative aluminium pipes.
The kit can be combined with each of the following
Edilkamin vents:
Split, with lighting
Bent, with lighting
Origami
Sharp
The vents are not included in the Air Kit Diffuser and
you can choose the one of the four models available
and described which best suits your needs at the
retailer.
Kit Air Diffuser Remote- ex
Vent
Compensation vent
Vent
Aluminium pipe,
dia. 60 mm
Aluminium pipe,
dia. 100 mm
Vent
Fan
Compensation vent
13
Control
unit
Hide quick links:
Advertisement
Table of Contents
