Table of Contents
Advertisement
Quick Links
EZ-LIGHT
K70 Wireless Indicator Light
®
Datasheet
®
The Sure Cross
K70 Wireless Indicator Light combines the best of Banner's popular Indicator Light family with its reliable, field-
proven, Sure Cross wireless architecture.
Important: Please download the complete K70 Wireless Indicator Light technical documentation, available in
multiple languages, from www.bannerengineering.com for details on the proper use, applications, Warnings,
and installation instructions of this device.
Important: Por favor descargue desde www.bannerengineering.com toda la documentación técnica de los K70
Wireless Indicator Light, disponibles en múltiples idiomas, para detalles del uso adecuado, aplicaciones,
advertencias, y las instrucciones de instalación de estos dispositivos.
Important: Veuillez télécharger la documentation technique complète des K70 Wireless Indicator Light sur notre
site www.bannerengineering.com pour les détails sur leur utilisation correcte, les applications, les notes de
sécurité et les instructions de montage.
Models
900 MHz Models
Model
K70DXN9RQ
K70DXN9GRQ
K70DXN9GYRQ
K70DXN9BGYRQ
K70DXN9WBGYRQ
2.4 GHz Models
Model
K70DXN2RQ
K70DXN2GRQ
K70DXN2GYRQ
K70DXN2BGYRQ
K70DXN2WBGYRQ
Integral quick disconnect models are listed; a mating corset is required (see
•
To order the 150mm (5.9 in) PVC pigtail with quick disconnect model, replace the Q with QP in the model number, for
example K70DXN9RQP.
•
To order the 2 m (6.5 ft) cable models, omit the suffix Q in the model number, for example K70DXN9R.
Original Document
192534 Rev. D
•
Available in 900 MHz and 2.4 GHz ISM Bands
•
Up to five colors in one device
•
Rugged, water-resistant IP65 housing with UV-stabilized material
•
Bright, uniform indicator segments appear gray when off to eliminate false indication
from ambient light
•
Two-way communication - lights can be controlled with the input wires or the master
radio
•
Input wires can be configured as auxiliary sourcing inputs from external devices or as
a 20 Hz, 32-bit event counter
No. of Colors
Colors
1
Red
2
Green, Red
3
Green, Yellow, Red
4
Blue, Green, Yellow, Red
5
White, Blue, Green, Yellow, Red
No. of Colors
Colors
1
Red
2
Green, Red
3
Green, Yellow, Red
4
Blue, Green, Yellow, Red
5
White, Blue, Green, Yellow, Red
8 November 2019
Connection
Integral 5-pin M12/Euro-style male quick
disconnect
Integral 8-pin M12/Euro-style male quick
disconnect
Connection
Integral 5-pin M12/Euro-style male quick
disconnect
Integral 8-pin M12/Euro-style male quick
disconnect
Accessories
on p. 8).
192534
Advertisement
Table of Contents
Related Manuals for Banner EZ-LIGHT K70 Series
Summary of Contents for Banner EZ-LIGHT K70 Series
- Page 1 K70 Wireless Indicator Light ® Datasheet ® The Sure Cross K70 Wireless Indicator Light combines the best of Banner's popular Indicator Light family with its reliable, field- proven, Sure Cross wireless architecture. • Available in 900 MHz and 2.4 GHz ISM Bands •...
- Page 2 ® EZ-LIGHT K70 Wireless Indicator Light Installation Instructions Assembling the K70 Rotate the dome clockwise to Align notches on lock into place dome and base and (notches shown in press together locked position). Wiring Sourcing (PNP) Input Euro-style Male Pinouts Module 1 = brown 12–30 V dc...
- Page 3 ® EZ-LIGHT K70 Wireless Indicator Light Sourcing (PNP) Input Euro-style Male Pinouts Module 1 = white 12–30 V dc 2 = brown 3 = green 4 = yellow 5 = gray 6 = pink 7 = blue 8 = red (event counter input, if enabled) C1 = Module 1 C2 = Module 2...
-
Page 4: Event Counter
® EZ-LIGHT K70 Wireless Indicator Light The event counter is active for RF firmware revision 5.3 or higher. In the default position (OFF), the input 1 through 6 control the tower lights. When DIP switch 3 is ON, input 5 wire is the counter input and input 6 wire is disabled. Registers 5 and 6 store the 32- bit synchronous counter count. -
Page 5: Modes Of Operation
® EZ-LIGHT K70 Wireless Indicator Light 1. Enter binding mode on the Gateway. • For housed models, triple-click button 2. • For board-level modules, triple-click the button. • For DXM models, under the ISM Radio menu, use the down arrow button to highlight the Binding menu. Click ENTER. On the board modules, the green/red LED flashes. -
Page 6: Modbus Registers
For DXM Controllers with an internal DX80 radio, connect a computer to the DXM Controller using a USB or Ethernet connection. Download the most recent revisions of the configuration software from Banner Engineering's website: www.bannerengineering.com/wireless. The USB to RS-485 adapter cable is not required for the DXM Controller. For standalone DX80 Gateway devices use: •... -
Page 7: Specifications
® EZ-LIGHT K70 Wireless Indicator Light Modbus Holding Register I/O Type I/O Range Holding Register Color # Representation (Dec.) Gateway Any Node Min. Max. Min. Max. 7 + (Node# × 16) Reserved 8 + (Node# × 16) Device Message 9 + (Node# × 16) Discrete OUT 9 / Bit-picked outputs 10 + (Node# ×... - Page 8 ® EZ-LIGHT K70 Wireless Indicator Light Radio Radio Range 2.4 GHz Compliance 900 MHz, 1 Watt (Internal antenna): Up to 3.2 km (2 miles) with line of sight FCC ID UE300DX80-2400: FCC Part 15, Subpart C, 15.247 2.4 GHz, 65 mW (Internal antenna): Up to 1000 m (3280 ft) with line of sight RED Directive 2014/53/EU IC: 7044A-DX8024 Minimum Separation Distance...
-
Page 9: Mounting Brackets
® EZ-LIGHT K70 Wireless Indicator Light 8-Pin Threaded M12/Euro-Style Cordsets with Open-Shield Model Length Style Dimensions Pinout (Female) MQDC2S-806 1.83 m (6 ft) MQDC2S-815 4.57 m (15 ft) 44 Typ. MQDC2S-830 9.14 m (30 ft) Straight M12 x 1 MQDC2S-850 15.2 m (50 ft) ø... - Page 10 ® EZ-LIGHT K70 Wireless Indicator Light Elevated Mount System Model Features Components SA-M30 - Black Polycarbonate • Streamlined black PC or Gray PC thread cover • Covers M30 thread on the light base SA-M30C - Gray Polycarbonate • Mounting hardware included Polished 304 Stainless Black Anodized Clear Anodized...
- Page 11 Banner Engineering Corp. Limited Warranty Banner Engineering Corp. warrants its products to be free from defects in material and workmanship for one year following the date of shipment. Banner Engineering Corp. will repair or replace, free of charge, any product of its manufacture which, at the time it is returned to the factory, is found to have been defective during the warranty period. This warranty does not cover damage or liability for misuse, abuse, or the improper application or installation of the Banner product.