Banner WORLD-BEAM QS18 Quick Start Manual

WORLD-BEAM QS18 Clear Object Detection
Quick Start Guide
™
Expert Coaxial Polarized Retroreflective Sensor for Clear Object Detection
This guide is designed to help you set up and install the QS18 Clear Object Detection. For complete information on
programming, performance, troubleshooting, dimensions, and accessories, please refer to the Instruction Manual at
www.bannerengineering.com. Search for p/n 194469 to view the Instruction Manual. Use of this document assumes
familiarity with pertinent industry standards and practices.
WARNING: Not To Be Used for Personnel Protection
Never use this device as a sensing device for personnel protection. Doing so could lead to
serious injury or death. This device does not include the self-checking redundant circuitry necessary
to allow its use in personnel safety applications. A sensor failure or malfunction can cause either an
energized or de-energized sensor output condition.
Overview
Amber LED
(Output Indicator)
Green LED
(Power Indicator)
Models
Models
QS18EN6XLPC
P
QS18EP6XLPC
CLEAR OBJECT
1
The standard 2 m (6.5 ft) cable models are listed.
• To order the 9 m (30 ft) cable models, add the suffix "W/30" to the cabled model number (for example QS18EN6XLPC W/30)
• To order the 4 pin Euro M12 integral connector, add the suffix "Q8" (for example QS18EN6LPCQ8)
• To order the 4 pin Euro M12 150 mm (6 inch) cable, add the suffix "Q5" (for example QS18EN6LPCQ5)
• To order a 4 pin Pico M8 integral connector, add the suffix "Q7" (for example QS18EN6LPCQ7)
• To order a 4 pin Pico M8 150 mm (6 inch) cable, add the suffix "Q" (for example QS18EN6XLPCQ)
Original Document
195502 Rev. A
The Banner QS18 sensor is a high performance clear object detection
sensor. The polarized coaxial optical design ensures reliable detection of
transparent, translucent, and opaque targets at any distance between
the sensor and the reflector. Low contrast sensing applications include
PET bottles, glass containers, and shrink wrap. The sensor can also be
Push Button
used to detect optical surfaces such as: LCD panels with built in
polarizing films, solar panels, and semiconductor wafers.
Indicators (Two LEDs: One Green, One Amber)
Sensor Condition (Run Mode)
Output OFF
Output ON
Notification — Sensor needs to be
reconfigured for reliable detection
Notification — Push button has been locked
out
Mode
COAXIAL
0 to 1.3 m (0 to 4.2 ft) on BRT-40X19A
0 to 2.0 m (0 to 6.5 ft) on BRT-60X40C
0 to 3.0 m (0 to 9.8 ft) on BRT-92X92C
POLAR RETRO
Range
20 June 2016
Green LED Amber LED
ON OFF
ON ON
Flashing at 5 Hz ON/OFF
Flashes 4 times and ON/OFF
returns to solid on
Output Connector
NPN
2 m cable (6.5 ft)
PNP
195502
1