Copying The Recorded Image Data To A Computer - Leica V-LUX 5 Instructions Manual

Copying the recorded image data to a computer

Copying stills and video
Preparation
• Turn on the camera and computer.
1
Connect camera to computer
• Check the plug direction and insert it straight in. (If the cable is inserted in the wrong direction,
the plug could become deformed and cause faulty operation.) Also, do not insert into the wrong
jack. Doing so may cause damage to this camera.
• Do not use any other USB cables except a genuine Leica USB cable of the supplied type. Using
cables other than the above may cause a malfunction.
[Access]
• Do not disconnect the USB cable (supplied) while [Access] is displayed.
[USB/CHARGE] jack
USB cable (supplied)
2
Use to select [PC(Storage)] and press [MENU/SET]
• If you set the [USB Mode] to [PC(Storage)] in the [Setup] menu in advance, the camera will be
automatically connected to the PC without displaying the [USB Mode] selection screen.
3
Copy the images to the computer using the software available for downloading
after registering your camera on the Leica Camera AG homepage
●
Before inserting or removing a card, turn the camera off and disconnect the USB cable. Otherwise,
data may be destroyed.
●
Use a sufficiently charged battery.
●
When the battery begins to run out during communication, a warning beep sounds. Remove the
USB cable safely. Otherwise, data may be destroyed.
241
Connecting with other devices