[Expo.Meter]
You can display the exposure meter.
Exposure meter
●
When you set this function to [ON], an exposure meter is displayed
during Program Shift, aperture setting, and shutter speed setting.
●
Proper exposure is not possible in the range indicated in red.
●
If the exposure meter is not displayed, press the [DISP] button to
switch the display of the monitor.
●
The exposure meter will turn off if no operation is performed for
approximately 4 seconds.
[MF Guide]
The MF guide is displayed during Manual Focus. You can
check whether the point of focus is to the near side or the far
side.
Indicator for
[Rec Area]
Switching the angle of view setting used for recording stills and video.
Indicated as the angle of view when recording stills.
Indicated as the angle of view when recording video.
●
The recording area indicated is an approximation.
●
[Rec Area] is fixed to [
[Remaining Disp.]
Switching the display between the number of recordable pictures that you can take and
the available recording time.
[Menu Guide]
You can display the selection screen when the mode dial is switched to [
199
(infinity)
] when recording 4K photos or recording in [Post Focus].
→
[Custom] →
Using Menu Functions
Menu list
[Monitor / Display]
15
30
60
125
250
2.8
4.0
5.6
8.0
11
]/[
].