Table of Contents

Advertisement

[HDR]

Recording mode:
The camera can combine 3 stills taken at different exposures into a single properly
exposed picture with rich gradation. The individual pictures used to create the HDR
picture are not saved. You can minimize the loss of gradations in bright areas and dark
areas when, for example, the contrast between the background and the subject is large.
A combined HDR picture is saved in JPEG format.
[Rec] → [HDR]
Settings: [ON] / [OFF] / [SET]
Changing the settings
[Dynamic Range]
[Auto Align]
After the shutter button has been pressed, do not move the camera during the burst operation.
Since a burst of stills are combined after they have been recorded, it will be a few moments before
you will be able to record another picture.
A subject that was in motion when it was recorded may be recorded as an afterimage.
When [Auto Align] is set to [ON], the angle of view narrows slightly.
When you take pictures using a flash, the flash mode is fixed to [
This function will not work for stills while video is being recorded.
This function is not available in the following cases:
• When using [Burst]
• When recording 4K photos
• When recording using [Post Focus]
• When recording using [Bracket]
• When [Quality] is set to [
• When using [Time Lapse Shot]
• When [Auto Shooting] of [Stop Motion Animation] is set to [ON]
183
[AUTO]: Takes pictures after automatically setting the adjustment range of
the exposure based on the contrast of a subject.
[±1EV] / [±2EV] / [±3EV]: Takes pictures using the adjustment range of the
[ON]: Automatically adjusts the displacement of pictures caused by jitter,
etc. We recommend using this setting to take pictures with a handheld
camera.
[OFF]: Does not adjust the displacement of pictures. We recommend using
this setting when you use a tripod.
], [
] or [
exposure being set.
] (Forced Flash Off).
]
Using Menu Functions
Menu list

Advertisement

Table of Contents
loading

Table of Contents