Table of Contents
Advertisement
■
Recording
Striping or flicker may appear in fluorescent lighting and LED lighting.
• This is characteristic of MOS sensors which serve as the camera's pickup
sensors. This is not a malfunction.
• If you are taking stills using the electronic shutter, the striping may be reduced
by setting a slower shutter speed. (→64)
• When noticeable flicker or striping is seen in pictures taken in fluorescent or
LED lighting in video recording mode, you can reduce the flicker or striping by
setting up [Flkr Decrease] (→185) and adjusting the shutter speed. You can set
the shutter speed manually in the Creative Video Mode. (→81)
Cannot record pictures. The shutter will not operate immediately when the shutter button is
pressed.
• When [Focus/Release Priority] is set to [FOCUS], the camera will not record until proper focusing is
achieved. (→192)
Recorded pictures look white.
• Lens is dirty (fingerprints, etc.).
→ Turn the camera on to extract lens barrel, and clean lens surface with a soft, dry cloth.
Recorded pictures are too bright/too dark.
• AE Lock (→105) is set incorrectly.
Multiple pictures are taken when I press the shutter button just once.
Check the following settings. If any of them apply, multiple pictures will be taken.
• Drive Mode is set to other than [Single].
→ Set the Drive Mode to [Single]. (→113)
• Bracket recording is set.
→ If any of the [
recording is set. Under [Bracket] in the [Rec] menu, set [Bracket Type] to [OFF]. (→138)
Focus not aligned correctly.
• Subject outside of focus range.
• [Focus/Release Priority] is set to [RELEASE]. (→192)
• [Shutter AF] is set to [OFF]. (→190)
• AF Lock (→105) is set incorrectly.
• If there are fingerprints or dirt on the lens, the focus may be set to the lens and not the subject.
Recorded pictures are blurred. The stabilizer function is ineffective.
• Shutter speed is slower in dark locations and the stabilizer function is less effective.
→ Use a tripod and the self-timer (→137) when using a slower shutter speed.
257
] icons (ex. [
], [
], [
], [
], etc.) is displayed on the screen, bracket
Others
Q&A Troubleshooting
Advertisement
Table of Contents
