Table of Contents
Advertisement
• When the camera identifies [
that jitter is reduced by the use of a tripod or by other means, a shutter speed that
is slower than usual is selected. After pressing the shutter button, do not move the
camera while recording.
• When recording 4K photos or when recording using [Post Focus], Scene Detection
works the same way as when recording video.
●
Depending on recording conditions, different scene types may be determined for the same
subject.
About Backlight Compensation
Backlight compensation is automatically activated in Snapshot Plus Mode or Snapshot Mode.
Backlight is a condition where a light shines from behind a subject. When there is a backlight, the
subject appears darker and the camera will automatically attempt to correct it by increasing the
brightness of the picture.
[Snapshot Mode] menu
Taking pictures using a handheld camera ([iHandheld Night Shot])
Recording mode:
[iHandheld Night Shot] can record a still with less jitter and less noise without using a
tripod by combining a burst of pictures if a night scene is detected automatically while the
unit is being handheld.
→
/
Settings: [ON] / [OFF]
●
The view angle narrows sightly.
●
Do not move the camera during the burst operation after the shutter button has been pressed.
●
The flash is fixed to the [
●
This function will not work for stills while video is being recorded.
●
This function is not available in the following cases:
• When using [Burst]
• When recording 4K photos
• When recording using [Post Focus]
• When recording using [Bracket]
• When [Quality] is set to [
• When using [Time Lapse Shot]
• When [Auto Shooting] of [Stop Motion Animation] is set to [ON]
59
Taking pictures with automatic settings (Snapshot Modes)
] as the optimal scene and if the camera determines
[Snapshot Mode] → [iHandheld Night Shot]
] (Forced Flash Off) setting.
], [
] or [
]
Recording mode
Advertisement
Table of Contents
