Table of Contents
Advertisement
The most important parameter to be adjusted is the
color transitions or the grid desktop background! If there is a interferenc visible, the value of the
has to be adjusted.
PLL Divider
The value of the
box, type in or click the arrows to select this value. Usually it will be necessary to in-
Divider
crease this value slightly to remove all interfering stripes. The direction of the adjustment is
correct as the number of vertical stripes decreases.
Check the position of the displayed monitor signal in relation to the window borders. To move
it to the left, increase the value of
VPos.
If necessary tune
With the settings under
With an optimized preset the result looks like this:
Now you can change the desktop to a colorful application and adjust the
dialog box (
video
Red
DOC-3266-2
Argus Workstation for Windows
is approximately 1.3 times the horizontal resolution. In the
PLL Divider
. To adjust the vertical position, change the value of
HPos
until the test pattern is displayed without flicker.
Phase
it can be tried to further improve the picture quality.
Advanced
,
,
,
Green
Blue
Brightness
December-2003
: Observe the outline of characters,
PLL Divider
and so on).
PLL
Figure 4-11
Optimized preset
by means of the
settings
4-24
Advertisement
Table of Contents
