Barco Argus User Manual page 109

Inside of the housing there is a transportation lock, which must also be removed to be able to insert
expansion cards. Loosen the screws
Before closing the housing the transportation lock must be readjusted. Therefore first insert the
plate, then turn in the screws but do not tighten them. Push the plate as far towards the cards as
possible. Just then tighten the screws.
4
PCI Slots
On the mainboard of the A
The PCI slots of the A
work, link interface cards to connect to the A
BARCO recommends certain expansion cards for the use in A
other cards it is at your own risk. The described graphic and video capabilities of
A
RGUS
DOC-3266-2 Argus Workstation for Windows
, (and
4 5
Transportation lock of the A
and of the A
P
RGUS ROCESSOR
P are meant to insert network cards to connect to the net-
RGUS ROCESSOR
are only available with the original expansion cards from BARCO.
December-2003
) and take out the plate.
6
4
P AGS-3328 for redundant operation (right)
RGUS ROCESSOR
there are six PCI slots for inserting expansion cards.
O B and Multiport I/O Cards.
RGUS MNI US
5 6
Figure 6-3
P AGS-3270 (left)
RGUS ROCESSOR
Figure 6-4
PCI slots of A P
RGUS ROCESSOR
! If you use
RGUS
6-3