Table of Contents
Advertisement
Preset Editor
The
allows the creation and adjustment of
Preset Editor
Configuration of RGB input
Preset
Name
Change
Timing
HPos
VPos
PLL Divider
Phase
Advanced
Set manually
VCO Range
Charge Pump
Current
Scaler Settings Dialog Box
In the
Scaler Settings
Scaler Settings
Sharpness
Pixel Format
DOC-3266-2
Argus Workstation for Windows
.
Enter a name for a new preset
Click this button to enter the correct resolution if the resolution shown dif-
fers from the resolution of your screen mode.
The horizontal position of the monitor signal in relation to the window is
adjusted
The vertical position of the monitor signal in relation to the window is ad-
justed
The value represents the actual number of pixels per line
Adjustment of the phase
Enables the automatic setting of the following parameters:
VCO Range
Charge Pump Current
dialog box the settings for RGB processing in the O
adjustment of sharpness factor, default is 0
16 bpp (RGB 5:6:5, default) or 32 bpp (XRGB 8:8:8:8)
32 bpp only applicable for RGB I
December-2003
. Please, refer to section
presets
MNI
Scaler Settings dialog box
C
NPUT
ARD
4.3.5
Figure 4-6
Preset Editor
S
can be set.
CALER
Figure 4-7
4-21
Advertisement
Table of Contents
