Barco Argus User Manual page 133

CABLES
The section
CABLES
to input cards.
The first entry in each line marks the source i.e. the output socket of the video source or the video
switcher, the last expression marks the destination, i.e. the input socket of the video switcher or the
input card.
Name of the video source as entered in section
video source
Name of the video switcher as defined in section
video switcher
ber. Numbering begins with
Name of the input card as defined in Table 6-21 or in section
input card
socket number. Numbering begins with
point. If there are any computers defined, the name of the computer has to be
prefixed. Separator after the computer name is a colon.
If a source is connected to more destinations, the destinations can be listed one behind the other,
separated by a comma or for each connection a single line.
CABLES
{
"rgb-1"
"rgb-2"
"Video-1"
"Video-2"
vsw0.4
vsw0.2
vsw1.1
vsw1.2
vsw1.3
}
The Compiler
After changing the switcher definition file, it has to be compiled and the data has to be inserted
into the registry.
Execute the file
slc.exe
> slc.exe <switcher definition file> [-Option] [-Option] ..
If no option is used and the compiler runs without an error through the switcher definition file, the
changes in the registry are made immediately. Files with the registry changes are stored as well in
the current folder with the name: <switcher
name>.reg for archiving purposes.
Option
print this help information
?
print result in text file only. No changes to registry permitted
f
print found paths for all input cards
p
print found devices
dev
print found definitions
def
select switcher definition file
c'filename'
If multiple Argus Processors are configured, each of them need to be in operation
while the compiler is running. The user has to have administrator rights on each of
these Argus devices.
DOC-3266-2 Argus Workstation for Windows
defines the connection of video sources to video switcher and video switcher
to vsw0.2;
to vsw0.1;
to vsw0.3;
to vsw0.4;
to rgb-on-server.1;
to argus-2:rgb2774v1[0].1;
to argus-2:frg2684[0].1;
to server:frg2684[0].1;
to server:frg2684[1].1;
with the syntax:
December-2003
Sourcelist
Switcher
Name and number are separated by a point.
1.
. Name and number are separated by a
1
definition
in quotes.
and the socket num-
and the
Grabber
file>.<computer
Table 6-22
6-27