Table of Contents
Advertisement
Now you will be asked if you want to reboot the system, click
As long as the system finds new graphic channels for which the driver is not yet installed, proceed
with the execution of the
If the
Found new Hardware Wizard
first part of the installation is ready. Please proceed with the steps explained in section
below. Further
setup.exe
If A
is operated with Windows NT:
RGUS
Installing the Argus/Eos drivers for Microsoft Windows NT the DLL msvcrt.dll will
be overwritten, if the included DLL is newer. This may cause other programs to fail.
More information about the meaning of the old and the new msvcrt.dll can be
found at the readme section below.
Switch on Argus and log in as
CD ROM drive. Now the system is ready to install the display driver under Windows NT
Executing setup.exe
If autorun is enabled on A
automatically, open the file
On the CD there are different releases of the A
this CD, it is recommended to select a release that is part of such a software edition (Section
Editions of the Control Room Suite
driver (Section
Releases of individual Products
appears. Select
Run this program from its current location
DOC-3266-2
Argus Workstation for Windows
Found New Hardware Wizard
appears no longer for
Found new Hardware Wizard
. Insert the CD
administrator
the start page of the CD has appeared. If the CD does not start
RGUS
from the CD by means of the Explorer.
CRSindex.htm
RGUS
). If not, you can just install the latest release of the display
). Follow the links unless the
December-2003
No.
.
Video Controller (VGA compatible)
Dialogs can be canceled.
Control Room Suite CRS-3045-C
/E
drivers. If using multiple software from
OS
and confirm with
OK
, the
Executing
in the
dialog
File download
.
3-38
Advertisement
Table of Contents
