Barco Argus User Manual page 125

Vfrequencies
This option has no effect on the display properties of A
UseSoftwareCursor
Whether the display driver is forced to use a software-cursor or not is stored as
UseSoftwareCursor in the registry.
UseSoftwareCursor
Name
DWORD Value
Typ
0 or 1
Value
0
Default
after rebooting
Effective
Please, refer to section
).
pointer
ForceHardwareCursor
This option has no effect on the display properties of A
SynchronizeEngine
With the SynchronizeEngine entry in the registry the graphic performance can be increased
accepting a longer interrupt time.
SynchronizeEngine
Name
DWORD
Typ
0 or 1
Value
0
Default
after rebooting
Effective
Please, refer to section
).
graphics engine
UseDeviceBitmaps
Whether device bitmaps (off-screen video memory) are used or not is stored as
UseDeviceBitmaps in the registry.
UseDeviceBitmaps
Name
DWORD
Typ
0, 1 or 800000..B000000 hex (8..176MB)
Value
1
Default
after rebooting
Effective
Please, refer to section
If the use of device bitmaps is activated, the display driver attempts to store the bitmaps in the
physical memory of the graphic cards. If this memory is not sufficient, system memory is used be-
yond (Paged Pool), which could lead to conflicts with system processes. The paged pool is man-
aged by Windows and only released to a specific amount. It is advisable to increase, this storage
space from 0MB (dynamic management) to the maximum 192MB (C000000 hex). This is set in
the registry editor under the following path:
DOC-3266-2 Argus Workstation for Windows
3.5.2 Configuring the Display Driver
3.5.2 Configuring the Display Driver
3.5.2 Configuring the Display Driver
December-2003
.
RGUS
for more details (
Use software mouse
.
RGUS
for more details (
for more details (
Use device bitmaps
Table 6-11
Table 6-12
Synchronize with
Table 6-13
).
6-19