Barco Argus User Manual page 20

1 air supply
2 handle of filter mounting
3 restart button
4 lock keyboard switch
5 buzzer reset button: power module failed
6 LED: power module failed
7 LED: hard disk operating
8 LED: power on
9 floppy disk drive
10a/b single hard disk drive / RAID
11 CD ROM drive
reserved
12
13 power button
Next to the air supply openings [1] there is the handle of the filter mounting [2].
In the center of the standard case there are three buttons. The upper one is the
the one in the middle is the
put and the lower one is the
disk drive operating
The case for redundant operation additionally has a
[5], which is located on the top leftmost position. The
lock keyboard switch
LED, indicating
power module failure
On the right hand side there is the floppy disk drive [9], followed by the CD ROM drive [11] and
below it the hard disk drive [10a] or [10b].
DOC-3266-2 Argus Workstation for Windows
lock keyboard switch
button [13]. The two LEDs next to the switches indicate
power
[7] respectively
power on
[4] and the
power button
[6].
December-2003
front view of A
[4], that serves to enable or disable keyboard in-
[8].
buzzer reset button
restart button
[13] instead. On the front there is also an additional
Figure 3-1
P
RGUS ROCESSOR
button [3],
restart
hard
for power module failure
[3] is located between the
3-3