Table of Contents
Advertisement
Depending on the configuration the card is delivered with different adapter cables:
Dual-DVI to 2×DVI-D adapter cable:
igital output for display on projection modules with digital input.
D
Dual-DVI to 2×CRT adapter cable:
nalog output for display on projection modules with analog input.
A
DDC capable display devices must be connected to the graphic cards before Argus
is switched on. If they are connected afterwards Argus will not be able to detect
them!
Order
The first graphic card in respect to PCI slot numbering identifies itself as primary graphic adapter
by lighting the green LED of the respective graphic channel when A
mary graphic adapter is the channel, where the system emits diagnostic and status messages during
system startup.
For the explicit order of the graphic cards, please refer to the sections
3.2.15 Arrangement of Expansion Cards
AGX and UGX G
RAPHIC
DOC-3266-2
Argus Workstation for Windows
.
C
may not be mixed within the same system!
ARDS
December-2003
Figure 3-13
Dual-DVI to 2×DVI-D adapter cable
Figure 3-14
Dual-DVI to 2×CRT adapter cable
is switched on. The pri-
RGUS
3.2.14 Argus OmniBus
and
3-12
Advertisement
Table of Contents
