Barco Argus User Manual page 139

Update of Network Card Driver
Insert the CD Control Room Suite into the CD-ROM drive and setup the driver of the network
adapter by means of a driver update in the device manager. Therefore open the device manager
(
Start -> Settings -> Control Panel -> System -> Hardware
devices select
Ethernet Controller
. Now you can select the appropriate driver for the network card form the directory
Update Driver
of the
Control Room Suite
<CDROM>:\3rd Party\Intel Pro100 Ethernet Adapter (NET-2792)
or for a 10/100/1000Mbps network card
<CDROM>:\3rd Party\Intel Pro1000 Ethernet Adapter (NET-3283)
Windows Service Pack
Install the suitable recommended service pack, please refer to section
care to install the service pack in the same language, like your Windows installation. The service
pack for Windows 2000 can be found in the directory:
<CDROM>:\3rd Party\Windows 2000\Service Pack 3\W2KSP3xx\
and for Windows XP:
<CDROM>:\3rd Party\Windows XP\Service Pack 1a\WXPSP1axx\
Optimizing Mouse Cursor for Argus System
For the optimal display of the mouse pointer when moved on video windows, deactivate the
pointer shadow (
Start -> Settings -> Control Panel -> Mouse -> Pointers
), please refer also to section
shadow
mation on software and hardware cursor.
DOC-3266-2 Argus Workstation for Windows
. After a right click on it, select
for a 10/100Mbps network card:
:
3.6.1 Appropriate Cursor for Video Applications
December-2003
Tab
-> Device Manger ...
Properties -> Driver
3.4 Operating System
Tab
-> Enable pointer
for further infor-
). In the list of
Tab
->
. Take
6-33