Table of Contents
Advertisement
The following table describes the available options:
/d:<video channel>
/v:<overlay>
/c:<config. file>
/e:<event>
/k:<event>
/t:<title>
/w:[[v]<width>[,<height>]]
[@<x>,<y>]
/a:s|d|m
/i:<source>
/o:b|m|r|p
/p:<preset>
/s:a|n|p|s|5|6
/4
/16
/c
/f
/k
/m
/p
/t
If using the option /c:, take care to indicate the complete absolute or relative path to
the configuration file!
DOC-3266-2
Argus Workstation for Windows
Specify video channel
(for description see below)
Specify the overlay plane. Values are:
use O
0
MNI
desktop plane
1
O
S
2
MNI
Default is 0.
Specify configuration file
(for description see below)
Open video window that will be closed and the
video software will be exited when <event> is
sent. The same event may be associated with mul-
tiple video windows.
Exit all videos started with option /e:<event>
Set video window title. Default is the name of the
video channel.
Set size and position of video window. v refers to
the actual video size (without borders).
Set aspect ratio of video window to
or
display
manual
Select the source.
Sets the optimization mode to
or
resolution
Selects a RGB preset (Autodetect is 0).
Sets the video standard to
,
SECAM
BW50 or BW60
Specify format of video source (
Default is /4 (4:3)
Disable preset cache in the video dialog box (In-
put).
Display video without a window (title bar, bor-
ders). Setting aspect ratio to
preserves the aspect ratio of the video, setting as-
pect ratio to
Disable keyboard shortcuts
To be used, if NT 4 Service Pack 3 or later is not
installed, or if orbiting is enabled
Disable video dialog box
Make video window a topmost window
December-2003
S
, if available
CALER
overlay plane
CALER
source
unless specified with /w:.
bandwidth
.
photo CD
,
Auto
NTSC
.
,
4:3
source
keeps the size of the display.
manual
options of video software
,
,
,
motion
,
,
PAL
)
16:9
or to
display
Table 4-3
4-8
Advertisement
Table of Contents
