Using Windows Tools
Remote Desktop: Using the Signal Generator Remotely
Ending a Remote Desktop session
There are two ways to disconnect the remote computer from the instrument:
ending the session:
Table 3-7
Step
1. Select the X, then OK.
or
2.When the remote desktop is full
44
Ending a session
screen, move the cursor to the
bottom left of the window:
—Select Start > Disconnect.
—Select Disconnect.
Notes
For full-screen, the X appears at the top center of
the window.
For non full-screen, the X appears in a red box at
the right of the window's title bar.
You are asked to confirm that you want to
disconnect.
M9384B VXG Microwave Signal Generator Startup Guide