Table of Contents
Advertisement
Using Windows Tools
Remote Desktop: Using the Signal Generator Remotely
Table 3-2
Step
3. Select Next.
4. To access the installed software, select
How to locate the computer name of the instrument
To connect a remote computer to the instrument, you need to know its
Computer Name. The Computer Name can be displayed as follows:
Table 3-3
Step
On the instrument front panel, select System >
Show > System.
Table 3-4
Step
Select Start > Control Panel > System
Running a Remote Desktop session
Initializing a Remote Desktop session
To initialize a Remote Desktop Session, you need to know the Computer Name of the
instrument.
M9384B VXG Microwave Signal Generator Startup Guide
Installing the Client software
Start > All Programs > Accessories >
Communications > Remote Desktop
Connection.
Locating the name from the Keysight application
Locating the name from the Windows desktop (using a mouse)
Notes
Follow the on screen instructions provided by
the Wizard.
Notes
A page listing various parameters appears.The
instrument's computer name is shown in the
list next to the title Computer Name.
Notes
The Computer name is listed in the Computer
name, domain, and workgroup settings
section.
39
Advertisement
Table of Contents
