Instrument Operating System
USB Connections
USB Connections
Al USB ports are compatible with the USB 2.0/3.0 and 1.1 specification. The
USB ports on the front panel are USB Series "A" ports. These ports can be used
to connect USB mass storage devices and printers. The instrument USB Host
support includes the standard Microsoft Windows USB drivers for human
interface, mass storage, printing, scanning, and imaging devices. A complete
up-to-date list of the Windows USB class driver support is available on the
Microsoft website.
Figure 2-1 Location of USB Ports
The instrument USB device driver included in the instrument software supports
the test and measurement industry standard USBTMC-USB488 device class.
Keysight Technologies does not support or warrant correct instrument
operation if additional USB drivers from third parties are installed in the
instrument. It is possible that additional drivers could break the normal USB
operation. If USB operation is broken, recovery would require reinstalling the
instrument application using the Instrument recovery process.
M9384B VXG Microwave Signal Generator Startup Guide
29