Keysight M9384B Startup Manual page 42

Using Windows Tools
Remote Desktop: Using the Signal Generator Remotely
Table 3-1
Step
1. On the instrument, open the Windows
2. Select System functions
3. Access Remote setting
4. Select the Remote option
5. To add users
6. Follow the on screen instructions.
Setting up the remote computer
The procedure depends on whether the Remote Computer to be set up is
running Windows 10, or another version of Microsoft Windows.
Remote computer running Windows 10
Windows 10 includes the Remote Desktop Connectivity Client software, so no
additional setup is required.
Remote computer running another version of Windows
You can use any version of Windows to install and run the Client software for
Remote Desktop Connectivity. However, you need to have available a Windows
installation CD-ROM, because that contains the Client software.
The following instructions relate to software provided by Microsoft
Corporation. Keysight offers no warranty regarding the operation of such
software. The procedure described here may be changed by Microsoft at
some future time.
Table 3-2
Step
1. When the Welcome Screen appears,
2. From the What do you want to do?
38
Setting up a remote desktop connection
Control Panel
Installing the Client software
select Perform additional tasks
screen, select Set up Remote Desktop
Connection.
Action
From the instrument application, select
System > Control Panel,
From the Adjust your computers settings
menu, click System.
In the Control Panel Home window, select
Remote settings
On the Remote tab, in the Remote Desktop
section, select the appropriate checkbox.
Choose Select Users> Add.
Notes
The Remote Desktop Connection InstallShield
Wizard appears.
M9384B VXG Microwave Signal Generator Startup Guide