Initial Start-Up; Installation Check List; Blower Dryer And Dishwasher Control Panels - Champion E Series Installation/Operation Manual With Service Replacement Parts

Initial Start-up

Installation Check List

1. Make sure the dishwasher is permanently located and the blower dryer
is properly mounted to the dishwasher.
2. Remove any protective film from the blower dryer.
3. Check the interior of the blower dryer for foreign material.
4. Make sure the dishwasher curtains are in their proper locations.
5. Make sure the dishwasher exhaust vent system is adjusted correctly.
6. Make sure all utility connections are complete.
7. Make sure the blower dryer panels and covers are secure.
8. Turn the main power to the dishwasher ON at the main disconnect breaker or switch.
9. Turn the main power to the blower dryer ON at the main disconnect breaker or switch.
10. Turn steam supply on for the dishwasher and the blower dryer (if applicable).

Blower Dryer and Dishwasher Control Panels

The blower dryer operates in combination with dishwasher. The blower dryer control panel, the rack
conveyor dishwasher control panel and the upright conveyor dishwasher control panels are shown
below.
AUTO
EBD Blower Dryer Control Panel
POWER START
E-series Upright Conveyor Dishwasher
Control Panel
6
OFF
STOP
POWER START
E-series Rack Conveyor Dishwasher
Control Panel
FAST
NORMAL
ENERGY
POWER
SAVER
E2-series Upright Conveyor Dishwasher
Control Panel
STOP
STOP